JIMS JIMS Castlenut Socket Black - PT539CJ - 5831

Combines three wrenches in one: 2-stroke spark plug/front axle/rear axleFits virtually all off-road machinesMade in the USA

EXRF6DJ

119 lei

MOTION PRO Shock Collar Spanner Wrench Black

Preorder

Tools

MOTION PRO Shock Collar Spanner Wrench Black

Sized for 68 mm and 87 mm OD lock rings with a 8 mm notchFits many street, off-road and ATV single shock applications

RX374PW

111 lei

MOTION PRO T6 Tire Lever Silver, Anodized

Preorder

Tools

MOTION PRO T6 Tire Lever Silver, Anodized

Hex end is rated for a maximum torque of 90 ft/lbPerfectly contoured tire spoon on one endLightweight forged 7075-T6 aluminumEU maximum rated torque for hex end: 122,02 Nm

V5Z24QH

230 lei

Preorder

Tools

MOOSE RACING HARD-PARTS Front Lift Strap Black

Buckles and bushing are made from 6061-T6 aluminumMounts to the front forks by weaving the webbing through the buckles adjust the length to suit your preferencePerfect for loading a machine into the back of your pick-upIntended for manual pulling of the motorcycle onlyNot intended to be used as a tie-down point, for lifting the entire motorcycle, or for...

TG4NGY4

113 lei

Preorder

Tools

WOODY'S Snowmobile Track Clip Tool

WOODY'S

ELRWRZV

891 lei

Base plate is made of 5/16'' hot rolled steel, laser cut, fitted with rubber grips to hold the bolts snug and is cut with clearance for guided track clipsAnvil is made of 6061-T6 tempered aluminum with a hardened steel ball locked in for the bolt to press onAnvil is locked in by 2 hardened shoulder bolts worry-free from falling out or getting cockedDrive...

Preorder

Tools

EBC Clutch Removal Tool Yellow, Brass

Aids in unlocking clutch retainer boltsSpeeds clutch removal

UTH7VG2

234 lei

Preorder

Tools

MOTION PRO Fork Seal Bullet Yellow

Protect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap the fork tube with tape

TXUUC3R

34 lei

PROGRESSIVE SUSPENSION Standard Shock Spring Tool Black

Preorder

Tools

PROGRESSIVE SUSPENSION Standard Shock Spring Tool Black

PROGRESSIVE SUSPENSION

TQK2L3J

129 lei

Designed to take the hassle of removing shock springsFits most springs on twin-shock motorcycles

Preorder

Tools

STAHLWILLE Extension Chrome

PatentDIN 3123/ISO 3316Measurement :size : 13L mm : 330d mm : 11,6Weight g : 145

PMSVKRF

198 lei

MOTION PRO Shock Spanner Punch Blue, Silver

Preorder

Tools

MOTION PRO Shock Spanner Punch Blue, Silver

An ideal tool for turning hard to reach lock and preload rings on rear shocksNon replaceable, extra length brass tip can be filed down to reshape tipAngled brass tip gives secure contact and protects ring from damageLong shaft allows easy reach to recessed components

9RYQW9Q

187 lei

Preorder

Tools

MOOSE RACING HARD-PARTS Rider's Wrench By Fredette Chrome

Combines three wrenches in one: 2-stroke spark plug/front axle/rear axleFits virtually all off-road machinesMade in the USA

Q4V59LS

134 lei

Preorder

Tools

NARAKU Variator Blocking Tool Black

NARAKU

6SF2APD

68 lei

Perfectly fitting variator locking tool.Makes installation and removal of the variator or alternator child’s play.Whether for tuning or maintenance, this tool will help make life easy.The locking tool is simply screwed and blocks the starter gear

PROGRESSIVE SUSPENSION Gauge-mounted Pump Black

Preorder

Tools

PROGRESSIVE SUSPENSION Gauge-mounted Pump Black

PROGRESSIVE SUSPENSION

ZC76XKJ

417 lei

Perfect for air shocks, forks and emergency tire repairsFor use with a variety of makes and modelsEasy to operateLet-down valve allows for minute adjustmentsCheck valve for no leaks and ability to disconnect

JIMS Hardware Organizer M8 Blue, Powder-coated

Preorder

Tools

JIMS Hardware Organizer M8 Blue, Powder-coated

JIMS has developed a new set of Milwaukee Eight specific hardware index tools to store and organize bolts while parts are disassembledCan be placed on their side to assist in the application of Loctite when re-assembling componentsAdded a new magnetic storage feature that will capture slip fit dowels

FNSHDPQ

2,369 lei

Preorder

Tools

JIMS Rod Alignment Tool Silver

Use to check rod straightness without removing the rods from the casesMade in the U.S.A.

PG7CCH4

247 lei

Preorder

Tools

MOOSE OFFROAD 1 Valve Core Tool Silver

Used to remove or install tire valve coresDesigned with a knurled handle

5K3CE56

61 lei

Preorder

Tools

MOOSE UTILITY DIVISION Bearing Greaser Black

MOOSE UTILITY DIVISION

ZN6TZ7Z

213 lei

Polaris wheel bearings are notoriously low on grease from the factory - now you can quickly and easily add grease to your wheel bearings with this handy toolDecrease wheel bearing temps while increasing longevity by periodically re-greasing your wheel bearingsNo need to remove the axles, this tool simply slides over the axle and into the hub for easy...

Preorder

Tools

MOTION PRO Fork Cap Socket Blue

Fits '14 KTM XC models and all '13-'14 Husaberg with WP 4860 4CS forkFor removing and installing left hand and right hand adjustable fork capsAllows proper torque of the fork cap assemblies during installation19 mm hex headLaser engravingCaution: Always wear safety glasses and refer to the fork manufacturer for correct assembly and disassembly procedures.

AU3DGZL

155 lei

Preorder

Tools

MOTION PRO Air Gauge Holder Silver

Designed for use with Motion Pro® professional and digital tire gaugesMagnet on back allows for quick mounting to any metal surfaceCan be used without magnet for permanent mountingEye-catching number plate graphics with space for personalized race numbers

VHK3U4P

194 lei

KUKKO 2 Jaw Extensions (pair) - Series V-p Silver

Preorder

Tools

KUKKO 2 Jaw Extensions (pair) - Series V-p Silver

KUKKO

AGUJQEW

258 lei

For removing bearings, gears, discs, etcJaw extensions in various lengthsJaw extensions only available in set of 2As a replacement part or supplement to your Kukko puller

Preorder

Tools

CRUZTOOLS Roadtech B1 For Bmw Motorcycles (2018 And Older) Black

CRUZTOOLS

SMME4HQ

740 lei

The perfect tool kit for 2018 and older BMW motorcycles. Designed for road-side repairs and adjustmentsThe tools stay organized in a heavy-duty roll-up pouch Kit IncludesCombination wrenches 8, 10, 12, 13 mm and 1 - Torx E10/128'' crescent wrench (to 26 mm)Locking pliersTire pressure gauge (0-50 psi)Wire and zip-tiesHex wrenches 3, 4, 5, 6, 8 mmTorx...

Preorder

Tools

WERA Insulated Nutdriver Orange, Red

WERA

39VMTT3

90 lei

Insulated VDE blades for secure work at 1000 voltsSmooth hard zones for high speed turning, soft grip zones for high torque transferHandle markings simplify finding and sorting of toolsHexagonal anti-roll feature against rolling awayZinc phosphate plated

PARTS UNLIMITED Carburetor Synchronizers Black

Preorder

Tools

PARTS UNLIMITED Carburetor Synchronizers Black

PARTS UNLIMITED

UASU3MQ

602 lei

Complete kits with vacuum gauges, hoses, adapters, mounting plate and instructions

MOTION PRO Brake Caliper Piston Tool Anodized Blue

Preorder

Tools

MOTION PRO Brake Caliper Piston Tool Anodized Blue

Ultra-low-profile design removes pistons from monoblock disc brake calipersFits pistons with a center bore size of 14 mm - 28 mmNon-marring design will not harm pistons or caliperWorks on aluminum, steel and titanium pistonsEasy-to-use single locking screw

TDYZDMP

215 lei

Preorder

Tools

MOTION PRO Clutch Holding Tool Silver

Will not work on clutch baskets with reversed inner clutch hubs where the integrated clutch faceplate is facing outwardNot recommended for V-groove or half-round-style clutch hubsHolds clutch hubs, flywheels, gears, sprockets, etc.Features 8 mm spanner pinsJaws open up to 5'' wide

SN69FTP

258 lei

MOTION PRO Fork Seal Bullet Set Silver, Yellow, White, Red, Orange, Green, Blue, Black

Preorder

Tools

MOTION PRO Fork Seal Bullet Set Silver, Yellow, White, Red, Orange, Green, Blue, Black

Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installationFitment size is marked on each bullet for easy identificationEliminates the need to wrap the fork tube with tape

KVJE7GY

185 lei

Preorder

Tools

EPI Atv Belt Removal Tool

EPI

7E4M3UP

48 lei

Will hold your clutch open allowing routine maintenance and service of clutchesUsed to safely and easily open the secondary clutch for belt removalCompact and easy to store

Preorder

Tools

JIMS Mighty Bite Flywheel Lock Blue

For use on the Milwaukee Eight™ engine series and all Twin Cam motorsThis tool is designed to lock the crankshaft when doing service workJust take out the crank position sensor and install the “Mighty Bite” into the caseThe tool has an added O-ring to prevent oil seepage

SK5WRJV

302 lei

Preorder

Tools

JIMS Driver Spacer Tool Black

Used with JIMS Bearing Race Tool to remove and install the steering head bearing race

HR2ZM3S

410 lei

Preorder

Tools

MOTION PRO Spring Hook Blue

Used to remove exhaust pipe springs, seat or tank holding springs, cotter pins, sidestand springs and other partsErgonomic handle provides a secure grip at every angle, and compact size provides easy access

FKYWPSM

57 lei

Preorder

Tools

WOODY'S Grinding Wheel Green, Red

WOODY'S

RPWVMZH

430 lei

Specially designed grinding wheel for sharpening carbide runners and studsHelps maintain sharp edges and points and can be used to alter stud point anglesCan be used on any hand or bench grinder with either a 1/2'' or 1'' arbor shaftIncludes arbor shim for 1/2'' or 1'' mounting holeNot recommended for general grinding1'' x 6''

MOOSE RACING Piston Pin Puller Black, Yellow

Preorder

Tools

MOOSE OFFROAD 1 Piston Pin Puller Black, Yellow

Four bit sizes remove piston pins from 12 mm (1/2'') – 25 mm (1'')Remove piston pins without damaging your piston

EFEWUPC

207 lei

Preorder

Tools

MOOSE OFFROAD 1 Tire Spoon Black, Silver

Spoon design decreases the chance of tube pinchCoated with a rubber handle

FZCAVK4

77 lei

MOTION PRO MOTION PRO Fork Seal Bullet Green TV2NVHW

Preorder

Tools

MOTION PRO Fork Seal Bullet Green

Protect the fork seal and wiper of inverted forks from damage by the bushing groove during installationSave time by eliminating the need to wrap the fork tube with tape

TV2NVHW

34 lei

Preorder

Tools

MOTION PRO Chain Brush Blue

Double-ended brush for cleaning chains and other componentsThree-sided brush to clean chain rollers and side plates in one operationLong, straight bristles on opposite end to clean hard to reach areasDurable nylon brush and high quality plastic handle

47XM9XN

47 lei

Preorder

Tools

JIMS Piston Pin Keeper Tool Black

This tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention possibleUse to install retaining ring in pistonMade in the U.S.A.

6PQ5ER4

457 lei

Preorder

Tools

PARTS UNLIMITED Oil Filter Wrench Black

PARTS UNLIMITED

2L9H3DK

34 lei

Oil filter cup-style wrenches for spin-on type oil filtersMakes servicing even hard-to-reach filters easyDesigned for use with 3/8” drive tools

Preorder

Tools

CRUZTOOLS Speedkit Tool Kit For Bmw-ktm-triumph

CRUZTOOLS

7UHSJMA

227 lei

Ultra-compact tool kit packed with functionality for European motorcycles such as BMW, KTM, or TriumphKit Includes10x12 mm open end wrench13x15 mm open end wrench8 mm nut driver5/8'' & 18 mm combo spark plug wrench with leverMini 5-in-1 screwdriver with Torx T20, 25, 27, 30 bitsHex keys: 3, 4, 5, 6 mm10-50 psi tire gauge5.5'' slip-joint pliersHeavy-duty...

Preorder

Tools

BARON Spring Compression Tool Silver

BARON

X5EDHXF

480 lei

Simplifies installation of rear spring, making it possible for the ''do-it-yourselfer'' to handle the job in their garage or shopMade in the U.S.A.

MOTION PRO Flywheel Puller-primary Gear Extractor Yellow, Oxide

Preorder

Tools

MOTION PRO Flywheel Puller-primary Gear Extractor Yellow, Oxide

Used for removal of the flywheel or rotor if applicableLaser etched with Motion Pro logo and part numberComes with 4 mm, 5 mm, 6 mm hardwareHeated treated for strength and durabilityPremium quality high carbon steelDurable hot black oxide finishLifetime limited warranty

YXXFQR3

148 lei

Preorder

Tools

EBC Clutch Removal Tools For Harley-davidson Brass, Yellow

Aids in unlocking clutch retainer boltsSpeeds clutch removal

X34ANAZ

245 lei

FLOSSER Replacement Parts For Voltage Tester Chrome

Preorder

Tools

FLOSSER Replacement Parts For Voltage Tester Chrome

FLOSSER

CCQU3L2

53 lei

Replacement bulb for voltage testerSold in packs of 10

Preorder

Tools

JIMS Pinion Gear Locker Tool Black

Use to lock pinion gear when torquing the pinion gear nutSimple to use just align underneath gear and screw into caseMade in the U.S.A.

NMPPSXG

1,296 lei

Preorder

Tools

EBC Clutch Removal Tool

Aids in unlocking clutch retainer boltsSpeeds clutch removal

7F9GCJJ

245 lei

Preorder

Tools

MOOSE RACING HARD-PARTS Shock Seal Tool Set Gold

Tool set includes five sizes: 12.5 x 10 mm, 14 x 12 mm, 16 x 12 mm, 18 x 16 mm, and 18 x 12 mmThis tool set makes for quick and easy removal and installation of seal head assembliesThese tools protect the shock shaft seal when installing the seal head onto the shaftComplete with case for organized storage and cleanliness

ARNHK47

428 lei

Preorder

Tools

HYPERPRO Vice Clamp

Preorder

Tools

MOTION PRO Spanner Nut Socket Black, Oxide

Used for removal and installation of spanner (castle) lock nutsLaser-etched with Motion Pro logo and part numberHeat-treated for strength and durabilityPremium quality high carbon steelLifetime limited warranty

JSW7FEQ

276 lei

Preorder

Tools

WERA Insulated Ratchet Set Orange, Red

WERA

9P5Q3WE

2,192 lei

Insulated and 100% individually tested Zyklop VDE ratchets, sockets and extensions for safe working up to 1000 voltsFine-toothed ratchet with 80 teeth for a short return angle of 4.5°Extremely slim design with a soft, ergonomic grip zone for easy work even in very confined spacesRobust and extremely compact textile box with socket holders, which ensure a...

TECHNORESEARCH Complete Oxygen Sensor Installation Kit Black, Clear

Preorder

Tools

TECHNORESEARCH Complete Oxygen Sensor Installation Kit Black, Clear

TECHNORESEARCH

ZA4JMWN

5,007 lei

Remove heat shields, install bung and tune when completed, use included screw and copper washer to seal bung and then replace heat shield for unaltered finishComplete bung kit includes 1 hydraulic insertion tool, 1 drill bit, 2 O2 sampler blocks, tubing, 25 rivnuts, 25 screws and, 25 copper washersNo pump or sampling tube required and allows both...

Preorder

Tools

JIMS Primary Locking Bar Black

Immobilizes primary driveAllows for tightening with a torque wrench or loosening with a breaker barPrevents damage to rotor or magnets sometimes caused by air-wrenchMade in the U.S.A.

SET574K

282 lei

Preorder

Tools

MOTION PRO Fork Cap Wrench Blue

Double ended wrench can be used for removal of the compression stackCan be used for removal of a compression stack on late-model RMsFor removing the caps on Showa MX forks

L2VPVY6

175 lei

Preorder

Tools

STAHLWILLE Socket Chrome

With hollow pointFor inside TORX® screws (TORX® TAMPER RESISTANT)Chrome Alloy SteelChrome plated.Measurement :size : T27TORX® size in mm mm : 5,0L1 mm : 28L2 mm : 16d mm : 11,6Weight g : 10

9M7MZR2

64 lei

Preorder

Tools

SW-MOTECH Multitool Keychain Silver

Preorder

Tools

JIMS Oil Pump Alignment Tool Black

This tool was designed to help the technician assemble the complete cam chest correctly, in a quick and efficient mannerThe perfect aid for the technician to either assemble as individual components with supplied studsOR as an assembly with the alignment dowel to save time and moneyMade in the U.S.A.

CGKL29G

477 lei

REGINA Regina Professional Chain Assembly Tool

Preorder

Tools

REGINA Regina Professional Chain Assembly Tool

REGINA

GLSAPVQ

31 lei

- The professional choice for assembly of Regina’s sealed chains- Works with both press fit and rivet links- High quality tools will function perfectly for years- Use 1/2'' tool for 420 and 428 chains and 5/8'' tool for 520-530 chains- Made in Italy

Preorder

Tools

EBC Clutch Removal Tools For Harley-davidson Brass, Yellow

Aids in unlocking clutch retainer boltsSpeeds clutch removal

49W45QT

245 lei

Preorder

Tools

JIMS 3rd Hand Axle Locker Tool Silver

Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tirePrevents axle from moving while torquing down the axle nut after setting belt tensionMade in the U.S.A.

GGH3VZE

527 lei

S&S CYCLE Tappet Block-oil Pump Alignment Tool Gray

Preorder

Tools

S&S CYCLE Tappet Block-oil Pump Alignment Tool Gray

S&S CYCLE

SQ3FDLJ

237 lei

Big Twin Evolution tappet blocks do not have counter-bored bolt holes therefore, when a tappet block is removed (or even just loosened) it should be reinstalled using an alignment tool to ensure that the lifters track properly on the camshaftThis tool makes the process quick and easy, ensuring the durability of your installationAlso aligns Twin Cam oil...

Preorder

Tools

EBC Clutch Removal Tool Yellow, Brass

Aids in unlocking clutch retainer boltsSpeeds clutch removal

VGRZND2

234 lei

MOTION PRO MOTION PRO Ringer Fork Seal Driver Blue, Silver, Anodized 7EMDLQ2

Preorder

Tools

MOTION PRO Ringer Fork Seal Driver Blue, Silver, Anodized

Locking ring features knurled finish for secure no-slip grip and positively locks body halves together during useInnovative design makes tool easier and more secure to use than old-fashioned pin-aligned driversHigh quality protective black e-coat with laser engraved markingsPerfectly weighted to drive sealsLimited lifetime warranty

7EMDLQ2

337 lei

Preorder

Tools

MOOSE RACING HARD-PARTS Pick Up Tool Silver

Designed to fit in hard to reach placesGreat tool to have around the shop

3TSGCTH

113 lei

SNO STUFF Deluxe Spring Tool Multi-pack Black

Preorder

Tools

SNO STUFF Deluxe Spring Tool Multi-pack Black

SNO STUFF

ZWJWTXP

337 lei

Contains a selection of exhaust spring hook toolsIncludes: 10-1/2'' curved tool with perpendicular hook 12-1/4'' angled tool with parallel hook 9-3/4'' straight tool with parallel hook 5-1/2'' straight tool with parallel hook and 5-1/2'' straight tool with perpendicular hook

Preorder

Tools

HYPERPRO Vice Clamp

Preorder

Tools

JIMS Wrist Pin Adapter Gray

Quickly and easily removes wrist pins from Milwaukee-Eight® enginesAdapter part for JIMS® Wrist Pin Tool (PART# DS-196197)Made in the U.S.A.

AHLPFST

614 lei

Preorder

Tools

QUAD LOGIC Wheel Bearing Tool Brass

QUAD LOGIC

GTLWX4P

546 lei

Get the job done fast and correctly using the Torpedo installation and removal tool setTools were developed to both remove and install the front or rear wheel bearingsIncludes a holder for the hub and driver to press the old bearing out of hubOnce removed, flip over the hub and driver and press in the new bearing

JIMS Inner Cam Bearing Installation Tool Black

Preorder

Tools

JIMS Inner Cam Bearing Installation Tool Black

Easily presses the inner cam bearing smoothly into the right case with the cases assembled to the proper depthMade in the U.S.A.

5XNTPGD

1,286 lei

MOOSE RACING T-handle Driver Socket Set Silver

Preorder

Tools

MOOSE OFFROAD 1 T-handle Driver Socket Set Silver

Tools for disassembling Kayaba, Showa and WP forks

CHDKVNK

100 lei

Drop forged “T” shaft

Preorder

Tools

SCAR Fork Cap Wrench Red, Anodized

SCAR

YLA77JX

188 lei

BS BATTERY Bt03 Battery Charge Indicator With Led Black

Preorder

Tools

BS BATTERY Bt03 Battery Charge Indicator With Led Black

BS BATTERY

97EFRLJ

95 lei

Eyelet connection set with 3 integrated LEDs (green, orange, red)This accessory is compatible with all BS smart chargersSAE charge port with weatherproof sealing cap2x M8 eyelet terminals - 8.4 mmCable length 50 cm (19.69'')10A fuse protectionExtra slim

EBC EBC Clutch Removal Tool Yellow, Brass FX5FW6Y

Preorder

Tools

EBC Clutch Removal Tool Yellow, Brass

Aids in unlocking clutch retainer boltsSpeeds clutch removal

FX5FW6Y

234 lei

Preorder

Tools

ATLANTIS Flush Kit Blue, White

ATLANTIS

F4ZZNK3

151 lei

Clean system of debris and contaminants including saltwater, sand and sedimentReplacement adapter hoses with quick-snap ends available separatelyAllow easy flushing of cooling system to keep it at peak efficiencyKits designed for specific applications

Preorder

Tools

EPI Ez Bearing Greaser Silver

EPI

HAHQ47E

238 lei

Quick and easy way to extend the life of your wheel bearingsSimply remove the wheel, brake caliper and hub (also spindle or wheel shaft for models that need 30 mm greaser) to insert greaser tool and use grease gun to pack wheel bearingsHigh quality CNC machined with precision drilled grease channel

MOTION PRO Mini T-handle Set Nickel Pewter

Preorder

Tools

MOTION PRO Mini T-handle Set Nickel Pewter

Set includes 3 T-handle wrenches with deep six-point socketsIdeal for quick use and easy storage

PPSX44S

205 lei

Preorder

Tools

MOTION PRO Rim Protectors Blue

Protects wheels from scratches and dings caused by tire changing toolsInclude retrieval cord for easy use

7FDAH2U

63 lei

Preorder

Tools

WERA Insulated Screwdriver Orange, Red

WERA

SYPPVV3

107 lei

Insulated VDE blades for secure work at 1000 voltsSmooth hard zones for high speed turning, soft grip zones for high torque transferTake ist easy tool finder: colour coding according to profile and sizeHexagonal anti-roll feature against rolling awayReduced shaft diameter

Preorder

Tools

KIMPEX Shovel Black

KIMPEX

MNJRS3C

448 lei

Cross cut saw in shaftLightweight designTelescoping shaft

MOTION PRO Jis Cross-head Hex-drive Bits Black

Preorder

Tools

MOTION PRO Jis Cross-head Hex-drive Bits Black

Designed to fit JIS cross-head screwsJIS bits are a must-have for most Japanese-made products and work equally well on traditional Philips-head screwsUse of traditional Philips driver on JIS cross-head screws will damage screw head

W3HTJAX

32 lei

Preorder

Tools

MOOSE RACING HARD-PARTS Clutch Bushing Tool

For use with all Polaris primary and secondary clutches to remove and replace clutch bushings

5XMEJQC

1,417 lei

REGINA Type 7 Chain Replacement Pin Silver

Preorder

Tools

REGINA Type 7 Chain Replacement Pin Silver

REGINA

WU63N4C

76 lei

Replacement pin for Regina® Chain BreakerFor 1/2”, 5/8” and 3/4” pitch chains

RK Replacement Parts For Rk Chain Breaker-press Fit Tool Black

Preorder

Tools

RK Replacement Parts For Rk Chain Breaker-press Fit Tool Black

RK

XHDXSXV

109 lei

Small pressure bolt

MOTION PRO Mini-pro T-handle Set Nickel Pewter

Preorder

Tools

MOTION PRO Mini-pro T-handle Set Nickel Pewter

Racer set includes a vinyl pouch to keep T-handles handyCompact size for easy access and easy transport

JJ6NQWF

226 lei

K&L SUPPLY Cam Chain Tensioner Holder Black, Silver

Preorder

Tools

K&L SUPPLY Cam Chain Tensioner Holder Black, Silver

K&L SUPPLY

UMRTYVW

706 lei

Allows retraction of the tensioner for ease of removal and installationThe tabs on the tool engage in the slots on the body of the tensionerSimply turn the knob to disengage the tensioner mechanismFeatures one-way bearing

Preorder

Tools

JIMS Fork Fluid Filler Blue

Ultimate tool for servicing fork oil on conventional forks that have a drain screwHuge time saver by not having to remove fairing, handlebars and other partsNo need to remove fork capsMade in the U.S.A.Not for use with cartridge or inverted forks

WEYJURH

2,147 lei

Preorder

Tools

STAHLWILLE Socket Chrome

With hollow pointFor inside TORX® screws (TORX® TAMPER RESISTANT)Chrome Alloy SteelChrome plated.Measurement :size : T27TORX® size in mm mm : 5,0L1 mm : 28L2 mm : 16d mm : 11,6Weight g : 10

PAKVJFV

54 lei

MOTION PRO Heavy-duty Clutch Holding Tool Blue, Silver

Preorder

Tools

MOTION PRO Heavy-duty Clutch Holding Tool Blue, Silver

Extended knurled handle provides sure grip when removing or torquing the clutch hub nutCan be used to remove the locking ring on UTV fuel cells to remove fuel pumpsReversible blades work on conventional square spline and on round spline styleSecurely holds clutch hubs on most motorcycles and ATVs

WSGW7XC

1,128 lei

JIMS Cam Bearing Installation Tool Black

Preorder

Tools

JIMS Cam Bearing Installation Tool Black

Designed to press from the letter side of the inner cam bearing to eliminate any damage to the bearings, cam or caseWill set bearings .023''-.028'' below case surfaceUse to install the two inner cam bearingsMade in the U.S.A.

A9CYVDS

1,752 lei

Preorder

Tools

MOTION PRO Valve Shim Tools Silver

Holds valve spring bucket down so adjusting shims can be removedFor adjusting valve clearance on twin cam modelsManufactured from hardened alloy steel

X9YHS4Z

108 lei

MOTION PRO T-6 Combo Lever Adapter Blue, Anodized

Preorder

Tools

MOTION PRO T-6 Combo Lever Adapter Blue, Anodized

3/8'' drive male and 1/4'' drive female for use with sockets for smaller front axles3/8'' square drive is rated for a maximum torque of 90 lb/ftAllows T-6 Combo Lever™ to be used as a 3/8'' driverCoin knurled to facilitate turning sockets by handLightening holesEU Note: Allows T-6 Combo Lever™ to be used as a 0,95 cm driverEU Note: 0,95 cm drive male and...

F4A2S73

201 lei

MOTION PRO Internal Snap-ring Pliers Black, Red

Preorder

Tools

MOTION PRO Internal Snap-ring Pliers Black, Red

Can be used to remove and replace small to medium internal snap rings up to 50 mm deep, including those used for transmission gear locating, bearing retention, and oil seal retentionAllows removal of internal snap rings used in hydraulic master cylindersApplicable to some fork seal retaining rings

3GHXQ62

205 lei

JIMS Sprocket Shaft Bearing Optional Sleeves Black

Preorder

Tools

JIMS Sprocket Shaft Bearing Optional Sleeves Black

For use on specific Harley-Davidson® Sportster and Buell® model yearsOptional sleeves for JIMS® Sprocket Shaft Bearing Installation ToolBoth optional sleeves are required to install the sprocket bearing

5R59RZ7

392 lei

FEULING OIL PUMP CORP. Cam Plate-oil Pump Tool Yellow

Preorder

Tools

FEULING OIL PUMP CORP. Cam Plate-oil Pump Tool Yellow

FEULING OIL PUMP CORP.

6GXKKFJ

889 lei

Use this reamer to perform a valve job on the pressure relief valve seat of any Twin Cam engine cam plate and Milwaukee Eight oil pump psi relief valve boreTo use, lightly machine (clean) the cam plate relief valve seat and re-seat the plunger valveCan be used on OEM or aftermarket cam platesBest used in conjunction with Feuling pressure testing tool,...

MOTION PRO Carburetor Tool 90° With Bits Silver

Preorder

Tools

MOTION PRO Carburetor Tool 90° With Bits Silver

Includes five 1/4'' (EU: 0,64 cm) hex drive bits (all 1/2'' (EU: 1,27 cm) long) - Straight-slot, Phillips, D-shaped air/fuel mixture screw bit, 6 mm hex jet bit and 1/4''-hex-to-1/4'' (EU: 0,64 cm) -drive bitDetent action in handle with matching laser-etched index marks allows for precise adjustments (detent feature can be disabled if desired)Designed for...

TPYSQUG

491 lei

Preorder

Tools

STAHLWILLE Insert Tool

Preorder

Tools

YUASA Jumper Cable Black, Red, Yellow

YUASA

EL67CQV

199 lei

Tangle-resistant encased rubber grips for safetyCome with convenient storage bagSimple to use easy to storeWon't stiffen or freeze

KUKKO 2 Narrow, Quick Adjusting Jaws (pair) - Series 3-p Black, Red, Silver

Preorder

Tools

KUKKO 2 Narrow, Quick Adjusting Jaws (pair) - Series 3-p Black, Red, Silver

KUKKO

MQTNHE2

362 lei

For removing bearings, gears, discs, etc. for tight or difficult-to-access spacesThin pulling hooks with Quickadjust in various lengthsPulling hooks with infinite adjustment on the cross-beamPulling hook with sliding part only available in pair of 2Variable reach thanks to jaw extensions, available up to a puller size of -20Turning the pulling hooks...

MOTION PRO Ringer Fork Seal Driver Blue, Silver, Anodized

Preorder

Tools

MOTION PRO Ringer Fork Seal Driver Blue, Silver, Anodized

Locking ring features knurled finish for secure no-slip grip and positively locks body halves together during useInnovative design makes tool easier and more secure to use than old-fashioned pin-aligned driversHigh quality protective black e-coat with laser engraved markingsPerfectly weighted to drive sealsLimited lifetime warranty

ZYEZY4Z

337 lei

Preorder

Tools

STAHLWILLE Wrench Chrome